SDS5034X is equipped with a 10.1-inch touch screen, which can quickly adjust the waveform position, set the area trigger, and select and set parameters. SDS5034X supports dozens of parameter measurements. If you use traditional knobs to select, it will undoubtedly consume a lot of time. Touch screen selection saves time and effort. In addition, SDS5034X also supports external mice and keyboards.
Web server allows remote control of the oscilloscope without installing a large-capacity driver. Measurement results can be demonstrated through the back-end VGA interface. At the same time, SDS5034X is also equipped with free host computer software that supports SCPI programming commands.
Rich trigger types:
SDS5034X supports up to 11 intelligent trigger types, which can quickly trigger signals with different characteristics. For example, using runt trigger (Runt) can quickly trigger at the set amplitude value.
Using traditional trigger types for special signals may require nearly 20 setup steps. To this end, SDS5034X adds a zone trigger function to all trigger types. By simply drawing a trigger area frame, complex signals can be triggered in one step.
The trigger sources supported by SDS5034X include 4 analog channels, 16 digital channels, EXT, EXT/5, and AC Line.
Serial protocol triggering and decoding covering a variety of industries:
SDS5034X provides multiple serial protocol triggering and decoding, covering multiple industries.
12C, SPI----embedded serial protocol triggering and decoding
UARTPC----serial protocol triggering and decoding
CAN, CANFD, LIN, FlexRay----automobile serial protocol triggering and decoding
I2S----audio serial protocol triggering and decoding
MIL-STD1553B----Aerospace serial protocol triggering and decoding
Powerful measurement functions:
SDS5034X currently supports more than 55 parameter measurements. The advanced measurement function can measure 12 parameters at the same time and display the parameter value change trend in the form of a trend graph. Turning on the statistics function can display the current value of the parameter, the average value, the minimum value, the maximum value, the standard deviation and the number of statistics. And the distribution of parameter values can be visually displayed in the form of a histogram. For example, when measuring clock jitter, the distribution of jitter can be visually seen.
If you want to select a specific area for measurement, you can use the threshold measurement function and then move the cursor to select the area.
Source selections for measurement include analog and digital channels as well as signals after Zoom, MATH waveforms, and Ref waveforms.
All-in-one oscilloscope
SDS5034X integrates multiple functions into one, greatly saving space and providing users with more value.
16-channel logic analyzer
25 MHz isolated signal source module, which can be used with the Bode plot function for power loop response testing
