Metal Cover Single Port Network Switch 1x1000Base-FX Industrial 1000M

{{ product.price_format }}
{{ product.origin_price_format }}
SKU:{{ product.sku }}
Model: {{ product.model }}
User Rating:

{{ }}

{{ }}


The Industrial Ethernet to Fiber media converter that provides cost effective, entry-level media conversion between Fast Ethernet and Gigabit Ethernet. With its fixed configuration, deployments are just plug-and-play, and with it is small size, it is ideal for locations where space is limited. It is able to operate under temperatures ranging from -40℃ to 75 ℃and is with IP40 rugged case to make sure the continuous operation in harsh environments, such as transportation, factories, outdoor places where extremely low or high temperatures can be experienced.


Main Features:

  • 10/100/1000Base-TX Model
  • Full/Half Duplex, Auto-Negotiation and Auto-MDI/MDIX
  • Optionally support LC/SC/ST/FC Connector
  • Plug & Play – no need for any user configuration
  • Robust IP40 Aluminum Metal Enclosure for Harsh Environments
  • Operate stably under the Temperature Range of -40 – 75℃
  • LED Indicates Diagnostic
  • Both DIN rail and Wall Mounting installation
  • Dual Redundant Power inputs


To avoid damage to the equipment and personal injury caused by improper use, please observe the following precautions:

  • Keep the power off during installation, wear an anti-static wrist, and ensure that the anti-static wrist is in good contact with the skin to avoid potential safety hazards.
  • The switch can work normally under the correct power supply. Please confirm that the power supply voltage matches the
  • Voltage indicated by the switch.
  • Before powering on the switch, please make sure that the power circuit is not overloaded, so as not to affect the normal operation of the switch and even cause unnecessary damage.
  • To avoid the risk of electric shock, do not open the case while the switch is working, even if it is not charged, do not open it yourself.
  • Before cleaning the switch, pull out the power plug of the switch. Do not wipe with a wet cloth. Do not use liquid to clean it.
  • The equipment installed in the rack is generally from bottom to top to avoid overload installation.
  • Avoid placing other heavy objects on the surface of the switch to avoid accidents.
Model FR-6N3101
Ethernet Interface
Copper Port 1x10/100/1000Base-TX RJ45 port
SFP slot 1x1000Base-FX (LC/SC/FC/ST connectors option)
Ports Mode(Tx) Auto Negotiation Speed
Full/Half Duplex Mode
Auto MDI/MDI-X Connection
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseTand 100BaseFX
IEEE 802.3ab for 1000BaseT
Packet Buffer Size 1M
Maximum Packet Length 2046bytes
MAC Address Table 1K
Transmission Distance
Optical Port Depends on optical module(0-160km)
RJ45 Port Transmission Distance 100m (using standard CAT5/CAT5e cable)
Power Information
Input Power 9-56V
Power Consumption 2W Max(Single Power Input)
4W Max(Dual Power Input)
Power Connector 1x 5 pin removable terminal
Physical Characteristics
Housing Aluminium case
IP Rating IP40
Dimensions 120x90x35mm
Installation Mode DIN-Rail/Wall Mount
Weight 300g
Operating Temperature -40~75℃(-40 to 167℉)
Operating Humidity 5%~90% (non-condensing)
Storage Temperature -40~85℃(-40 to 185℉)
Heat Dissipation 7 BTU/h
Noise Level 0 dBA
Cooling Passive Cooling
MTBF 2,573,692 Hours, Telcordia SR-332 GF 30℃
Defects Liability Period 5 years warranty, lifetime technical support
Package Contents
Device 1x Industrial Media Converter
Installation Kit 1 x Caps, plastic, for SFP Slots
Or 1 x Caps, plastic, for SC fiber port
Or 1 x Caps, plastic, for ST fiber port
2x Wall-Mount Kits
1x DIN Rail Clip
Documentation 1 x Quick installation guide
1 x Warranty card
1x Product notice
Only jpg/jpeg/png files can be uploaded, and it should not exceed 2M
Cancel Submit
Add reviews
Add first reviews
  • {{ item.user_name }}
    {{ item.content }}
    {{ item.created_at }} {{ item.order_product_name }}